Loader Utilities
Loader utilities provide a means by which the loader mechanism can be tested or diagnosed. These utilities are meant for TEAC approved service personnel and advanced users only. If in doubt, do not use these utilities.
System Information
These functions are used to display information about the various components installed in the CD Autoloader.
PCA Info
Display the installed firmware level, amount of RAM and the number of writers found in the system, and the number of writers licensed in this system.
Writer Info
Display Recorder manufacturer, model number and firmware revision. While it is possible to use different writer types, and different firmware revisions, TEAC recommends using the same writer type and the latest approved writer firmware.
Hard Drive Info
Display the manufacturer, model number and capacity of the installed hard drive.
Autoloader Info
Display Autoloader information.
Upgrade License
Enabled options can be changed via these functions. To get a new key to enable new options contact TEAC or an authorized TEAC distributor.
Show Current Key
Display current installed options Key String. This Key String is
Enter New Key
Enter a new installed options Key String. Entering this Key String can change your installed options. Contact TEAC or an authorized TEAC distributor to get a new key string. See the Entering Text section of this chapter for instructions on entering text.
Setup Menu
These menus are used to select various options available on the Disc Publisher.
12
