Teac DVDPublisher/2 user manual Other Requierments, Mount Plate

NOTE:

If your Disc Publisher is damaged during shipment, please contact the freight carrier first, then contact your distributor or TEAC.

You should save your shipping materials so that if the need arises you can return your Disc Publisher for service. This packaging was designed specifically for shipping your Autoloader. Other packaging may not be as suitable.

Other Requierments

Your Disc Publisher system may require addition Part(s) depending on the printer configuration.

Fig. 2 Fig. 3

Pin for Inkjet Printer

P-55 Mount Plate	Adjustment Knob
	Base Platform

P-55 operation will require for you to install the Mounting Plate. First remove the Inkjet Pins from the Base Platform and save them. No screws are required to install the mounting plate due to the two latching points on the Base Platform. Final setup will look like the picture below.

Fig. 4 Fig. 5

2