Password Menu
The TCP series copiers allow access to be restricted by passwords. A different password can also be set for general use (Operator Password), and for system setup (Setup Password). The passwords operate independently of each other, so it is possible, for instance, to have a password required for setup, but no password required for Operator use. It is also possible to have a single Operator Password to give access to the whole machine, without additional password requirements for the Setup Menu. Passwords are optional. Many users never need to use passwords.
Each password must be setup separately. By default, no password is active, and the machine can be used without passwords. To enable a password, choose either.
Operator Password or Setup Password from the Setup Menu then select Enable Password.
The system will request a default password. This is a password that is fixed within every machine
Now enter any
Each password can be changed or disabled via additional menu items that are displayed once Passwords have been enabled.
Entering Text
Since there are no letters on the keyboard text must be entered with the arrow keys. When text needs to be entered all available character positions are displayed between square brackets as follows:
[_ _ _ _ _ _ _ _ _ _ _ _ _]
If the initial text is not defined all blanks will be displayed. Otherwise the starting text will be displayed. Press the left < or right > arrow to move the cursor the desired character location. Then press the up /\ or down \/ arrow to increment or decrement the displayed character.
Following are the differences for each type of text asked for in various places in the program.
17
