Put the Master Disc in the Input Hopper on top of the Blank disc and press the ENTER key. The Autoloader will pick the Master Disc, and place it in the drive tray, the tray will close and the Master Disc will be analysed and then read. When the Master read is complete, the tray will open and Autoloader will remove the disc from the tray, and place it into the Accept pile. The arm will then return to the Input stack, and take one blank disc and placed it onto one of the two recorders. It will also load a second blank disc onto the other recorder.
The recorder trays will close and the recording the start. There is a timer (percentage bar indicator) at the top right corner of the display that counts down, showing the approximate time left before the end of the recording.
Quick Start Comparing
Using the Compare function is essentially the same as copying. The only difference is that you
use themenu selection, and you will be using written discs, rather than blank ones.
NOTE:
Because of the way Audio and Video CDs are recorded, CDs containing Audio or Video tracks cannot be verified. This is not a limitation of the Disc Publisher equipment, but a limitation of the CD error correction system.
6
