Available only on TrueNET enabled systems, setting this to YES will cause the system to enter network mode immediately on power on. Set to NO, the system will run in
Multi Image HD
If set to YES discs read will be named and stored on the hard drive for future use. Many CD images can be kept on the hard drive.
If set to NO a master read will still be saved to the hard drive but it will have no name and will be overwritten by the next master read.
NOTE:
If Multi Image HD is enabled and Images are stored on the hard drive and then the Autoloader is operated with Multi Image HD set to NO all the previous images may be lost.
Ask Quantity
If set to YES, the user will be prompted for a quantity at the start of a copy / compare job. If set to NO, the machine will copy until told to stop by pressing and holding the STOP key.
Copy Index Marks
Default setting for this should be Yes
Async Copying
When set to YES, the system will run the drives asynchronously. Setting this to NO will increase the time taken for duplication, since all drives must be loaded or unloaded before duplication can continue (synchronous operation).
Async Jobs
Default Setting for this should be No
Check Blank Size
If set to YES, the copier will check that blank disc has enough free space on it before starting to write. If set to NO, the copier will attempt to write the image to the disc, even if the blank is not large enough. This may mean that copies are rejected, because the blank disc did not have sufficient room. This feature allows discs to be over burned.
Warn Need 80min
If this option is set to YES, a warning message will appear each time you start a copy job, with a master image greater than 74 minutes. This prompt is to remind the operator that the image will not fit on a 74 minute
14