Teac DVDPublisher/2 user manual Keyboard, LCD Display

Keyboard

Following is the function of each key on the keyboard:

< YES Key

Left arrow or YES –If being prompted to enter a number or character this key moves the cursor 1 character to the left. If prompted with a question this key answers YES.

> NO Key

Right arrow or NO –If being prompted to enter a number or character this key moves the cursor 1 character to the right. If prompted with a question this key answers NO.

/\ Key

/\ (Up arrow) –If being prompted to enter a number or character this key increments the character at the cursor to the next higher character or number. If a menu is being displayed this key moves the cursor to the next menu selection up.

\/ Key

\/ (Down arrow) –If being prompted to enter a number or character this key decrements the character at the cursor to the next lower character or number. If a menu is being displayed this key moves the cursor to the next menu selection down.

Enter Key

If being prompted to enter a number or name this key accepts the currently displayed selection. If a menu is being displayed the ENTER key moves 1 level deeper into the menu structure. If the next item is executable it starts that process.

Stop Key

This key stops or aborts whatever is going on. When recording discs the system is busy and this key may not respond immediately, so press and hold it down until prompted to do something else.

While a menu is being displayed the STOP key backs up 1 level higher in the menu structure.

LCD Display

The LCD display is used either to display menus or to show status. For instance while copying it shows what it is doing, the number it has to do, how many it has done and the current mode (such as Burn or Simulate).

8