Remote Control

Installing the Remote Control Battery

1.Pull the battery holder out from the remote control as shown below.

2.Load a new battery properly with the (+) side up.

3.Insert the battery holder back into the remote control.

Battery Type: CR2025 3V

Battery service life: approximately 1 year under normal use (at room temperature)

Using the Remote Control

Point the remote control to the remote sensor on the unit within a 5-meter range and 60-degree angles, without obstacles between the remote control and remote sensor.

Notes:

Improper use of the battery may cause overheating, explosion or ignition, which can result in an injury or fire. Battery leakage may damage the remote control.

Do not expose the remote control to direct sunlight.

Do not recharge, disassemble, deform, or heat the battery.

Immediately replace the exhausted battery.

Take out battery when the remote is not being used for a long period of time.

13

Page 13
Image 13
Polaroid PDU-0832 user manual Installing the Remote Control Battery, Using the Remote Control