White Rodgers 1F95-1271 specifications Thermostat Quick Reference, Home Screen Description

THERMOSTAT QUICK REFERENCE

Home Screen Description

Figure 2 – Home Screen Display

Time and Day	Room Temperature and Setting Temperature
	(flashes when compressor is in 5 minute lockout)

System button for selecting

Heat/Off/Cool or Auto (Heat/Cool)

Fan (Auto/On)

Stage 1

Indicates when thermostat is

calling for Heat or Cool

Temperature Up/Down
Displays	indicating the current power
level of the 2 "AA" batteries. When the batteries
become low, "Change" will appear with the		.
The batteries should be replaced at this time.

Menu for Cleaning, Programming and Setting Time

Figure 3 – Programming & Configuration Items

Programming and Configuration Items

1Displays and "Keypad Lockout" when in keypad lockout mode.

Displays and "Temperature Limit" and "Keypad Lockout" when limited range is activated and locked. Displays only "Temperature Limit" when limited range is activated.

2Indicates period of day being programmed.

3RUN SCHEDULE (run program) button.

4SET TIME button or HOLD temperature button.

5Displays "Change Filter" when the system has run for the programmed filter time period as a reminder to change or clean your filter. Displays "Humidifier Pad" when the system has run for the programmed filter time period as a reminder to change or clean your humidifier pad.

6COPY button or INSTALLER CONFIG button.

7CLEAN DISPLAY button allows 30 seconds to wipe off the display or ADVANCE DAY button for programming.

8Used in programming to set time and in configuration menu to change selections.

9"Hold Until" indicates the time when a temporary hold period will end.

10"Hours" and "Days" displays during steps in installer configuration.

	10	11
9
8			1
	14		2
	13	12
			3
7	6	5	4

11The words "Hold At" are displayed when the thermo- stat is in the HOLD mode. "Temporary Hold At" is displayed when the thermostat is in a temporary HOLD mode.

12"Call For Service" indicates a fault in the heating/ cooling system. It does not indicate a fault in the thermostat.

13"Stage 1" indicates when heating or cooling stage is energized. "+2" also indicates when a second stage is energized.

14"Copy" indicates the copy program feature is being used during programming.

3