Tektronix 480X user manual Ready light blinks, but file doesn’t print, Error indicator is on

6Troubleshooting

READY light blinks, but file doesn’t print

This is probably the result of a PostScript error. Download the PostScript Error Handler Þle from the Phaser 480X CD-ROM or optional utility diskettes. For more information on using the PostScript Error Handler, see

the Phaser 480X Drivers and Utilities Printing Reference.

MEDIA indicator blinks, and no print is produced

You have requested manual feed. Refer to ÒManual feedÓ on page 3-13.

Print job doesn’t finish (printer times out)

If you are using the serial or parallel port from a PC, make sure that you used the MODE command to set the PCÕs communication parameters. For example:

MODE LPT1:,,P > NUL

MODE COM1:9600,N,8,1,P

If you are using Windows 3.1, make sure that the Transmission Retry value for the printerÕs assigned port is set to 995. For more information on setting up ports, refer to the CD-ROM or HAL and EuroHAL, the automated fax systems.

ERROR indicator is on

The printer might be cooling down after printing a dense image. Wait

5 minutes for the printer to cool down; if the indicator does not go out, turn the power off and on again. If the ERROR indicator is still on after the power-up sequence, your printer requires service. See ÒIf you need helpÓ on page 6-1 for telephone information.

6-14Phaser 480X Color Printer