Tektronix 480X user manual Replace the plastic cover on the paper tray

Getting Set Up 2

5.Load the paper into the paper tray with the printing side down (the non-printing side is marked with Tektronix):

a.While pressing down on the tab of the metal plate, slide the paper into the tray.

b.Make sure that the hooks are positioned over the left and right corners of the paper and that the paper is inserted evenly with the printing side down.

c.Do not Þll past the red line on the left inside wall of the paper guide (approximately 50 sheets).

5a

5b

5c

8849-13

6.Replace the plastic cover on the paper tray.

User Manual 2-13