Tektronix user manual Installing the Phaser 480X driver

2Getting Set Up

Installing the Phaser 480X driver

1.Make sure that your Macintosh is turned on with System Software version 7.0 or later installed.

2.Insert the CD-ROM into the CD-ROM drive or the Macintosh Printer Drivers diskette into the disk drive.

■If you are using the CD-ROM, open it and open the Drivers folder.

■If you are using the diskette, it should appear on the desktop open, showing the icons inside.

3.Drag the Phaser 480X driver icon and the Phaser 480X Prefs Þle from the CD-ROM or diskette to the closed System Folder icon on your Macintosh hard disk.

■At the alert message, click OK to automatically install the software in the Extensions folder.

4.Select Chooser from the Apple menu.

5.Click the Phaser 480X printer driver icon on the left side of the Chooser. A list appears with the printers you have connected to your Macintosh or printers that are available on a network. (If the printer driver icon does not appear, Restart your Macintosh, and repeat the printer driver installation procedure; also check the cable connections on your computer and printer.)

6.Click on the Phaser 480X printer in the list of printers on the right side of the Chooser.

7.Close the Chooser by clicking its close box.

8.Store the CD-ROM or diskette in a safe place.

2-24Phaser 480X Color Printer