Tektronix 480X user manual Front panel indicator, Indicator Blinking Off

7Front and Rear Panels

Front panel

					TRANSFER
		ERROR	JAM	MEDIA		ROLL	COVER	READY POWER
								8849-48
Front panel indicator
Indicator	On			Blinking				Off
POWER	The power switch is on.							The power switch is off, or the
								printer is unplugged, or the
								power supply has failed.
READY	The printer is idle and ready for			The printer is processing or				The printer is not ready, or
	operation.			printing an image.				there is an error.

ERROR The print engine is cooling after printing a dense image. Wait 5 minutes for the indicator to go out. If it does not, turn the printer off, wait 30 seconds, and turn it back on again. If it is still lighted after the power-up sequence, the print engine has an error that is not user-correctable and requires service.

Normal operation: there are no print engine or controller board errors.

JAM	Media is jammed inside the printer.
	Transfer roll is jammed inside the
	printer.
	Transfer roll is not installed.

Normal operation: there are no media jams and the transfer roll is installed.

MEDIA	There is no media in the tray, or the tray	Waiting for manual feed.	Media is ready to feed.
	is not installed.
COVER	The top cover is open. The printer does	Not applicable.	Normal operation: the top
	not print while the cover is open.		cover is closed.

TRANSFER Transfer roll is used up or there is not

ROLL enough of the transfer roll left for the print job.

A/A4 transfer roll is installed	Normal operation: the
with B/A3/WB media. Part	transfer roll is ready for use.
of the image will be lost.

7-4 Phaser 480X Color Printer