Tektronix 480X user manual RS-232, LocalTalk Parallel, Serial

Caring for Your Printer 4

h.On the rear panel of the printer, set Switch 6 to the up position. (A diagram of the switch settings appears on the back panel with the switches.)

				2h
Serial
(RS-232)								1	2	3	4	5	6	7	8	9
								Reset	Extended		*	Skip	*	1200	*	*
									Diagnostics			Startjob		Baud Rate
								Run	Power Up			Run		Variable
													*See User Manual
LocalTalk®										Parallel
1	2	3	4	5	6	7	8	9
															9237-18

i.Set Switch 1 to the up position, then to the down position. Wait for the motor noises to stop.

j.Toggle Switch 1 up, then down three more times.

Note Always wait for the motor noises to stop before toggling Switch 1.

k.Reset the switches: set Switch 6 to the down position; set Switch 1 to the up position, then to the down position.

l.Remove the cleaning sheet from the paper tray and put it away (it can be used up to 12 times). Wipe out any excess alcohol from inside the tray before reÞlling it with paper. Put the paper tray back into the printer.

User Manual 4-7