Tektronix user manual Printing from a Macintosh, Using the Phaser 480X driver

3Printing

Printing from a Macintosh

The Tektronix CD-ROM and the Macintosh Printer Drivers diskette include two Macintosh printer drivers that allow you to select printer features.

Using the Phaser 480X driver

1.Make sure that the Tektronix printer driver for the Macintosh has been installed. If it hasnÕt, refer to ÒInstalling a driver on your computerÓ on page 2-21 for instructions.

2.Select the driver:

a.Select Chooser from the Apple menu.

b.Select the Tektronix driver by clicking on the Phaser 480X printer icon. (If it did not appear in the list of drivers, restart your Macintosh and repeat the driver installation procedure.)

A list of printers available in the current zone appears.

c.Select the zone where your Phaser 480X is connected.

d.Select the printer by name (default is Phaser 480X).

You can change the default name with the LaserWriter Utility which is on the CD-ROM and the Macintosh Printer Utilities diskette. See the Phaser 480X Drivers and Utilities Printing Reference for instructions.

3.To print a Þle, use the Page Setup and Print commands from the File menu within your application:

a.In the Page Setup dialog box, select the desired paper size so that the application uses the correct margins for the printer. To see the printerÕs page sizes in the Page Setup dialog box, use the pop-up menu to the right of the standard LaserWriter page sizes.

3-2 Phaser 480X Color Printer