Yamaha HTR-6150 owner manual 67 En, Speaker level BSP Level, Crossover Crossover

Crossover CROSSOVER

Use this feature to select the crossover frequency of all the speakers set to “SML” (or “SMALL”) in “SPEAKER SET” (see page 65). All frequencies below the selected frequency will be sent to the subwoofer or front speakers depending on the setting of “LFE/BASS OUT” in “SPEAKER SET” (see page 65).

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz

1 SOUND MENU

A)SPEAKER SET

CROSSOVER

SET MENU

■Speaker level B)SP LEVEL

Use this feature to manually adjust the output level of each speaker.

Control range: –10 to +10 dB

Control step: 1 dB

Initial setting: 0 dB

1 SOUND MENU		1 SOUND MENU
B)SP LEVEL	1/2	B)SP LEVEL	2/2
-__________+		-__________+
. FR.L		.SUR.L
FR.R		SUR.R
CNTR		SBL
SWFR		SBR

FREQ;;;80Hz

Subwoofer phase SUBWOOFER PHASE

Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear.

Choices: NORMAL, REVERSE

1 SOUND MENU

A)SPEAKER SET

SUBWOOFER PHASE

>NORMAL REVERSE

•Select “NORMAL” if you do not want to reverse the phase of your subwoofer.

•Select “REVERSE” to reverse the phase of your subwoofer.

SP LEVEL	Adjusted speaker
FR.L	Front left speaker
FR.R	Front right speaker
CNTR	Center speaker
SWFR	Subwoofer
SUR.L	Surround left speaker
SUR.R	Surround right speaker
SBL	Surround back left speaker
SBR	Surround back right speaker

Notes

•The available speaker channels differ depending on the setting of the speakers.

•Instead of “SBL” and “SBR”, “SUR.B” is displayed if “SUR.B L/R SP” is set to either “SMLx1” or “LRGx1” (see page 66).

OPERATION ADVANCED

English

67 En