Yamaha HTR-6150 owner manual 25 En, Using the remote control

DCINEMA DSP indicator

Lights up when you select a sound field program (see page 41).

VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active (see page 41).

SILENT CINEMA indicator

Lights up when headphones are connected and a sound field program is selected (see page 41).

EMulti-information display

Shows the name of the current sound field program and other information when adjusting or changing settings.

FSLEEP indicator

Lights up while the sleep timer is on (see page 39).

GInput channel and speaker indicators

LFE LFE indicator

L C R

SL SB SR Input channel indicators

SBL SBR

Input channel indicators

•Indicate the channel components of the current digital input signal.

•Light up or flash according to the settings of the speakers when this unit is in the automatic setup procedure (see page 26) or the speaker level setting procedure in the “SP LEVEL” (see page 67).

Connections

■Using the remote control

The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.

Approximately	30º	30º
6 m (20 ft)

1Infrared window

Outputs infrared control signals. Aim this window at the component you want to operate.

y

To set the remote control codes for other components, see page 78.

Notes

•Do not spill water or other liquids on the remote control.

•Do not drop the remote control.

•Do not leave or store the remote control in the following types of conditions:

–places of high humidity, such as near a bath

–places of high temperature, such as near a heater or stove

–places of extremely low temperatures

–dusty places

PREPARATION

English

25 En