Connections
Connecting the wire of the AM loop antenna
Open the lever | Insert | Close the lever |
y
The wire of the AM loop antenna does not have any polarity and you can connect either end of the wire to AM or GND terminal.
Assembling the supplied AM loop antenna
Note
The types of the supplied AM loop antenna is different depending on the models.
Connecting the power cable
Once all connections are complete, plug the power cable into the AC wall outlet.
(U.S.A. model)
AC OUTLETS
SWITCHED
Power cable
■AC OUTLET(S) (SWITCHED)
Australia model | ...................................................... 1 outlet |
Korea model | None |
Other models | 2 outlets |
Use these outlet(s) to supply power to any connected components. Connect the power cable of your other components to these outlet(s). Power to these outlet(s) is supplied when this unit is turned on. However, power to these outlet(s) is cut off when this unit is set to the standby mode. For information on the maximum power or the total power consumption of the components that can be connected to these outlet(s), see “Specifications” on page 97.
