4Make sure that “SETUP” is set to “AUTO” and the pointer is pointing at “START”.

y

You can also select the following setup methods. In this case, press 8kto select “SETUP”, press 8l/ hto select the one of the following choises and then select “START”.

Choices: AUTO, RELOAD, UNDO, DEFAULT

•Select “AUTO” to automatically run the entire “AUTO SETUP” procedure.

•Select “RELOAD” to reload the last “AUTO SETUP” settings and override the previous settings.

•Select “UNDO” to undo the last “AUTO SETUP” settings and restore the previous settings.

•Select “DEFAULT” to reset the “AUTO SETUP” parameters to the initial factory settings.

Note

“RELOAD” or “UNDO” is available only when you have previously run “AUTO SETUP” and confirmed the results.

5Press 8n to select “START” and then press 8ENTER to start the setup procedure.

The following message appears in the OSD.

NOTICE

Loud

Please or

Press

Before proceeding next operation

Once you perform the next operation, this unit starts the automatic setup procedure. For more accurate measurements, keep quiet and move to the wall where speakers are not around. We recommend that you leave the listening room during the automatic setup procedure.

Optimizing the speaker setting for your listening room

6Press 8ENTER to start the setup procedure.

This unit starts the auto setup procedure. Loud test tones are output from each speaker during the auto setup procedure. Once all items are set, the result display appears in the OSD.

Notes

•During the auto setup procedure, do not perform any operation on this unit.

•We recommend getting out of the room while this unit is in the auto setup procedure. It takes approximately 3 minutes for this unit to complete the auto setup procedure.

This unit performs the following checks:

Speaker wiring/volume level WIRING/LEVEL

Checks which speakers are connected and the polarity of each speaker. Also checks and adjusts the volume level of each speaker.

Speaker distance DISTANCE

Checks the distance of each speaker from the listening position and adjusts the timing of each channel.

Speaker size SIZE

Checks the frequency response of each speaker and sets the appropriate low-frequency crossover for each channel.

PREPARATION

English

27 En

Page 30 Page 32
Page 31
Image 31
Yamaha HTR-6150 owner manual 27 En
Page 30 Page 32

HTR-6150 specifications

The Yamaha HTR-6150 is a versatile and powerful home theater receiver designed to enhance your audio and video experience. This receiver is a testament to Yamaha's commitment to providing high-quality sound and cutting-edge technology, making it an ideal choice for both home theater enthusiasts and casual listeners alike.

One of the standout features of the HTR-6150 is its ability to deliver rich, immersive sound through multiple channels. With 5.1-channel surround sound, it allows users to take full advantage of movies, music, and video games by creating a multidimensional audio experience. The built-in Dolby Digital and DTS decoding processes ensure that users enjoy high-fidelity sound that meets modern standards in home entertainment.

The HTR-6150 also supports various audio formats, allowing for wider compatibility with different media sources. It includes inputs for HDMI, component, and composite video, enabling connections to a variety of devices, including Blu-ray players, gaming consoles, and cable boxes. The presence of multiple HDMI inputs facilitates easy switching between devices without the need for constant rearranging of cables.

In terms of power, the Yamaha HTR-6150 boasts a robust amplifier section, delivering 100 watts per channel, which is sufficient to drive most speakers with ease. This power output ensures that the receiver can reproduce sound at loud volumes without sacrificing clarity or detail, allowing you to enjoy every nuance of your favorite media.

Another notable technology embedded in the HTR-6150 is Yamaha's proprietary YPAO (Yamaha Parametric room Acoustic Optimizer). This feature automatically calibrates the receiver's audio output to suit the acoustic characteristics of your specific room, ensuring that sound performance is optimized no matter the environment. By measuring the sound in your room and making necessary adjustments, YPAO enhances the overall listening experience.

A user-friendly interface enhances the usability of the HTR-6150. With an informative on-screen display, navigating through settings and options is straightforward. The included remote control also offers convenient access to all functions, making it easy to switch between sources and adjust volume levels.

Overall, the Yamaha HTR-6150 is a well-rounded home theater receiver that brings together powerful audio capabilities, advanced technology, and user-friendly features. It is an excellent solution for anyone looking to elevate their home entertainment setup with quality sound and versatile functionality. Whether you are watching movies, playing games, or enjoying music, the HTR-6150 delivers an engaging audio experience that truly enhances your enjoyment.
Top Page Image Contents