Optimizing the speaker setting for your listening room
The display changes as follows.
AUTO SETUP
SETUP;;;;;;;AUTO
.START
Automatic Processing of all item
[p]/[p]:Up/Down [ENTER]:Start
AUTO SETUP
INITIALIZING
.WIRING/LEVEL DISTANCE SIZE
WAITING;;;
;;;;;;;;;;
[[
AUTO SETUP
RESULT
SP : 3/2/0.1
DIST: 3.2/3.5m
LVL :
. >SET CANCEL [
]/[
]:Up/Down [ENTER]:Enter
The results displayed under “RESULT” are as follows.
Number of speakers SP
Displays the number of speakers connected to this unit in the following order:
Front/Back/Subwoofer
Speaker distance DIST
Displays the speaker distance from the listening position in the following order:
Closest speaker distance/Farthest speaker distance
Speaker level LVL
Displays the speaker output level in the following order: Lowest speaker output level/Highest speaker output level
Notes
•If
•If you selected “RELOAD” in step 4, no test tones are output.
•If an error occurs during the “AUTO SETUP” procedure, the setup procedure is canceled and an error screen appears. For details, see “If an error screen appears” on page 29.
•When this unit detects potential problems during the “AUTO SETUP” procedure, “WARNING” and the number of warning
messages appears (see page 29).
7Press 8k and 8ENTER to display the setup results in detail.
8Press 8l / h repeatedly to toggle between the setup result displays.
Results of the speaker connection and wiring
Results of the speaker distance from the listening position
Results of the speaker size
Results of the speaker output level
y
If you are not satisfied with the results or want to manually adjust each parameter, run “MANUAL SETUP” (see page 63).
Note
The distances displayed in the “DISTANCE” results may be longer than the actual distance depending on the characteristics of your speakers.
9Press 8ENTER to return to the result display.
AUTO SETUP
.RESULT
SP : 3/2/0.1
DIST: 3.2/3.5m
LVL :
>SET CANCEL
[
]/[
]:Up/Down
[ENTER]:Detail
