Manuals / Fujitsu / Computer Equipment / Computer Drive

Fujitsu MHV2080AH, MHV2100AH, MHV2060AH, MHV2040AH Phases of operation, Ultra DMA data in commands

Models: MHV2040AH MHV2080AH MHV2060AH MHV2100AH

1 280
Download 280 pages 2.14 Kb
Page 214
Image 214

Interface

Both the host and device perform a CRC function during an Ultra DMA burst. At the end of an Ultra DMA burst the host sends the its CRC data to the device. The device compares its CRC data to the data sent from the host. If the two values do not match the device reports an error in the error register at the end of the command. If an error occurs during one or more Ultra DMA bursts for any one command, at the end of the command, the device shall report the first error that occurred.

5.5.2 Phases of operation

An Ultra DMA data transfer is accomplished through a series of Ultra DMA data in or data out bursts. Each Ultra DMA burst has three mandatory phases of operation: the initiation phase, the data transfer phase, and the Ultra DMA burst termination phase. In addition, an Ultra DMA burst may be paused during the data transfer phase (see 5.5.3 and 5.5.4 for the detailed protocol descriptions for each of these phases, 5.6 defines the specific timing requirements). In the following rules DMARDY- is used in cases that could apply to either DDMARDY- or HDMARDY-, and STROBE is used in cases that could apply to either DSTROBE or HSTROBE. The following are general Ultra DMA rules.

a)An Ultra DMA burst is defined as the period from an assertion of DMACK- by the host to the subsequent negation of DMACK-.

b)A recipient shall be prepared to receive at least two data words whenever it enters or resumes an Ultra DMA burst.

5.5.3 Ultra DMA data in commands

5.5.3.1 Initiating an Ultra DMA data in burst

The following steps shall occur in the order they are listed unless otherwise specifically allowed (see 5.6.3.1 and 5.6.3.2 for specific timing requirements):

1)The host shall keep DMACK- in the negated state before an Ultra DMA burst is initiated.

2)The device shall assert DMARQ to initiate an Ultra DMA burst. After assertion of DMARQ the device shall not negate DMARQ until after the first negation of DSTROBE.

3)Steps (3), (4) and (5) may occur in any order or at the same time. The host shall assert STOP.

4)The host shall negate HDMARDY-.

5)The host shall negate CS0-, CS1-, DA2, DA1, and DA0. The host shall keep CS0-, CS1-, DA2, DA1, and DA0 negated until after negating DMACK- at the end of the burst.

6)Steps (3), (4) and (5) shall have occurred at least tACK before the host asserts DMACK-. The host shall keep DMACK- asserted until the end of an Ultra DMA burst.

5-138

C141-E217

Page 213 Page 215
Page 214
Image 214
Fujitsu MHV2080AH, MHV2100AH, MHV2060AH, MHV2040AH manual Phases of operation, Ultra DMA data in commands
Page 213 Page 215

MHV2040AH, MHV2080AH, MHV2060AH, MHV2100AH specifications

The Fujitsu MHV series of hard disk drives, specifically the MHV2060AH, MHV2080AH, MHV2100AH, and MHV2040AH, are renowned for their reliability and performance in the mobile HDD segment. Designed primarily for use in laptops and other portable devices, these drives integrate cutting-edge technologies to meet the demands of today's data-intensive applications.

One of the hallmark features of the MHV series is its high data density, allowing for substantial storage capabilities in compact sizes. The MHV2060AH offers a storage capacity of 60 GB, while the MHV2080AH and MHV2100AH offer 80 GB and 100 GB respectively. The MHV2040AH provides a slightly more modest but still robust 40 GB of storage. This range of capacities ensures that users can select the model that best fits their storage needs.

The drives utilize the latest perpendicular magnetic recording (PMR) technology, which enhances recording efficiency and increases data storage densities. This technology significantly optimizes the use of disk surface area, providing better performance and more reliable data access. Additionally, the MHV series incorporates an advanced actuator system that ensures precision head positioning, enhancing data integrity and reducing error rates during read and write operations.

In terms of performance, the MHV series maintains a revolutions per minute (RPM) rating of 5400, which strikes a balance between speed and energy efficiency, making these drives suitable for low-power applications. The drives are also designed with a low acoustic level, generating minimal noise during operation—a crucial factor for mobile users who prefer quieter devices.

Furthermore, the Fujitsu MHV series features a robust shock resistance design, allowing them to withstand the rigors of mobile computing. This makes them suitable for use in portable environments subject to vibration and physical movement, thus ensuring data security and drive longevity.

Overall, the Fujitsu MHV2060AH, MHV2080AH, MHV2100AH, and MHV2040AH represent a formidable selection of mobile hard disk drives filled with advanced technologies and features, making them well-suited for a wide range of applications in today's fast-paced digital world. With their combination of storage capacity, performance, and durability, these drives continue to serve as reliable solutions for users seeking efficient data storage in portable formats.