Fujitsu MHV2060AH, MHV2100AH manual Off-line data collection status, Self-test execution status

5.3 Host Commands

Table 5.10 Off-line data collection status

Status Byte	Meaning
00h or 80h	Off-line data acquisition is not executed.
02h or 82h	Off-line data acquisition has ended without an error.
04h or 84h	Off-line data acquisition is interrupted by a command from the host.
05h or 85h	Off-line data acquisition has ended before completion because of a
	command from the host.
06h or 86h	Off-line data acquisition has ended before completion because of an
	error that makes acquisition impossible. (Not used)
40 to 7Fh	Vendor unique (Not used)
C0h to FFh
01h or 81h
03h or 83h	Reserved
07h or 3Fh
87h to BFh

•Self-test execution status

	Table 5.11 Self-test execution status
Bit	Meaning
0 to 3:	Remainder of the self-test is indicated as a percentage in a range
	of "0h to 9h" (corresponding to 0 to 90 %).
4 to 7:	Self-test execution status
= 0h:	Self-test has ended successfully, or self-test has not been
	executed.
= 1h:	Self-test is suspended by the host.
= 2h:	Self-test is interrupted by a soft/hard reset from the host.
= 3h:	Self-test cannot be executed.
= 4h:	Self-test has ended with an abnormality because of unknown
	contents.
= 5h:	Self-test has ended with "Write/Read Test" error.
= 6h:	Self-test has ended with "Servo Check," error.
= 7h:	Self-test has ended with "SMART Drive Error Log Check,"
	"Random Read Test," "Adjacent G-List Test," or "Read Scan
	Test" error.
= 8h:	Self-test has ended with "Pre-SMART Check," or "Post-SMART
	Check" error.
= 9h:	Reserved
= Ah:	Reserved
= Bh:	Reserved
= Ch to Eh:	Reserved
= Fh:	Self-test is in progress.

C141-E217 5-49