Fault codes
How to Recognize a Fault Code
When a fault has occurred, the DishDrawer® will continuously beep every second.
The fault code will be displayed on the electronic display for prefinished models and on the inside control panel for integrated models.
Each fault code is shown in the following chart for prefinished and integrated models.
How to Attend to a Fault Code
1Press the button to remove the fault code.
2If the fault code and continuous beeps cannot be removed by pressing the button, turn the power off at the power supply.
3We recommend you check the following chart and correct the fault where possible.
4After attending to the fault, turn the DishDrawer® on at the power supply.
5If the fault code and continuous beeps remain, turn the water and power supply off to the DishDrawer®.
6When calling your Authorized Service Center advise them of the fault code that has appeared on the DishDrawer®. This information will help the Authorized Service Center respond to your request.
28