Operation
1Load Dishes
Remove all food scraps and load the dishes.
2Add Detergent
3Check Rinse Agent
4Press the 
Button
5Select a Wash Program
The length of the wash program will appear on the electronic display (if applicable).
6Check
Ensure there is nothing obstructing the spray arm. The drain filter must be level with the filter plate.
7Start
Close the drawer and press the 
button.
8Finish
The DishDrawer® will beep six times to indicate the end of the wash program. At the end of the wash program the drying fan will continue to run for a set time or until the drawer is opened. The fan assists with drying and uses negligible amounts of energy. It
is normal for some water to remain in the drain filter area after the wash program is complete.
1
2,3 6
4
7
5
6
