Fisher & Paykel DS603 manual Trouble shooting, Problem, Possible Cause, What to do

Trouble shooting

Problem	Possible Cause		What to do
Continuous	A fault has occured.		Refer to the Fault codes section.
beeping
Intermittent	DishDrawer® is in pause		Close the DishDrawer® and press the
beeping	mode.				button.
DishDrawer® will	Power supply is not		Connect the power supply.
not start	connected.
	The drawer is not properly		Ensure the drawer is firmly closed.
	closed.
	Lock feature is on.		Turn the Lock off. Hold down the
				/		button until the			symbol
			disappears from the LCD or the light
			above the				/	button disappears.
		button not pressed.	Press the				button.
Excess water in	Drain hose(s) bent or		Straighten the drain hose(s).
the DishDrawer®	kinked.
	Blocked filters and/or drain		Clean the filter plate/drain filter. Unblock
	hose(s).		the drain hose(s). Refer to the user
			maintenance section.
Water marks on	Insufficient rinse agent.		Ensure there is enough rinse agent in
the dishes			the dispenser.
	Rinse agent setting too		Increase the rinse agent setting.
	low.
	DishDrawer® overloaded/		Refer to the section on loading.
	incorrectly loaded.

Insufficient or no salt in the water softener.

Ensure there is enough salt in the water softener and/or increase the water softener setting.

Dishes did not	Incorrect loading.	Ensure the dishes are not nesting
dry		together.
	Rinse agent depleted.	Refill the rinse agent dispenser.
	Rinse agent setting too	Increase the rinse agent setting.
	low.
	Eco wash program used.	Choose a standard wash program.

25