Complete Installation
1.Insert foam seal behind the top of the lower window sash and against the glass of the upper window.
A
B
A. Top of lower window sash
B. Foam seal
2.Use a ¹⁄₈" drill bit to drill a starter hole through the hole in the top channel.
3.Attach top channel to window sash with one ³⁄₄" screw to secure window in place.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
4.Plug into a grounded 3 prong outlet.
5.Press RESET on the power supply cord. See “Electrical Requirements.”
AIR CONDITIONER USE
Operating your air conditioner properly helps you to obtain the best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
■If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This will keep the air conditioner from blowing a fuse or tripping a circuit breaker.
■Do not try to operate your air conditioner in the Cool mode when outside temperature is below 65°F (18°C). The inside evaporator coil will freeze up, and the air conditioner will not operate properly.
NOTE: In the event of a power failure, your air conditioner will operate at the previous settings when the power is restored.
9
