Sleep Control
The air conditioner automatically adjusts the temperature and sets the Fan speed to Low for up to 8 hours.
NOTES:
■If the current room temperature is 79ºF (26ºC) or higher, the set temperature will not change when Sleep control is activated.
■If the current room temperature is below 79ºF (26ºC), the set temperature will automatically increase 2ºF (1ºC) during the first 2 hours after Sleep control is activated.
■The set temperature will not increase during the last 6 hours of Sleep control.
1.Press MODE to select Cool, Heat (Heat/Cool models only), Dry or Power Saver.
2.Press the up or down arrow button to set the temperature.
3.Press SLEEP. After 10 seconds, the lights on the control panel display will dim. The mode indicator lights will remain on.
NOTE: The mode and temperature may be adjusted during Sleep mode. Fan speed is automatically set to Low.
4.To turn off Sleep control, press SLEEP, MODE or FAN, or wait 8 hours for Sleep control to turn off automatically.
NOTE: The air conditioner will return to previous settings after Sleep control is turned off.
Temperature
■Press the up arrow button to raise the temperature. Each time you press or hold the up arrow button, the temperature will go up 1ºF (1ºC) until it reaches 90°F (32°C).
■Press the down arrow button to lower the temperature. Each time you press or hold the down arrow button, the temperature will go down 1°F (1°C) until it reaches 64°F (18°C).
Timer
To set Timer for a
1.Press TIMER. Timer indicator light on the air conditioner control panel will flash.
2.Press up or down arrow button to change the delay time from 30 minutes to 24 hours.
3.After 5 seconds, Timer indicator light on the air conditioner control panel will remain on.
To set Timer to turn on air conditioner, keeping previous settings:
1.Turn off the air conditioner.
2.Press TIMER. Timer indicator light on the air conditioner control panel will flash.
3.Press up or down arrow button to change the delay time from 30 minutes to 24 hours.
4.After 5 seconds, Timer indicator light on the air conditioner control panel will remain on.
To set Timer to turn on air conditioner, changing the previous settings:
1.Turn on air conditioner.
2.Adjust the mode to Cool, Dry, Fan, Heat (Heat/Cool models only) or Power Saver.
3.For Cool, Fan, Heat (Heat/Cool models only) or Power Saver mode, adjust fan speed to High, Med, Low or Auto.
NOTE: Auto fan speed cannot be selected in Fan mode.
4.Adjust temperature between 64ºF and 90ºF (18ºC and 32ºC).
NOTE: In Fan and Dry mode, temperature cannot be adjusted.
5.Wait 3 seconds before turning off air conditioner.
6.Press TIMER. Timer indicator light will flash. Display will show remaining hours before air conditioner will turn on.
7.Press the up or down arrow button to change delay time from 30 minutes to 24 hours.
8.Press TIMER again or wait 5 seconds. Timer indicator light will remain on. Display will show current room temperature.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1.Press TIMER once after it has been programmed. Display will show remaining time.
2.While the display is showing the remaining time, press TIMER again. Timer indicator light will turn off.
To see or change the remaining time (in hours):
1.Press TIMER once after it has been programmed. Display will show remaining time.
2.While the display is showing the remaining time, press the up or down arrow button to increase or decrease the time.
3.After 5 seconds, the display will show the current room temperature.
13
