Haier CWH08A manual Starting Your Air Conditioner, Cool Only Models, Fan Speed

	Starting Your Air Conditioner
Cool Only Models	Heat/Cool Models

NOTE: When the air conditioner is set to Fan mode and the room temperature is below 32ºF (0ºC), the display will show LO. If the room temperature is above 99ºF (37ºC), the display will show HI.

1.Press POWER to turn on the air conditioner.

NOTE: When the air conditioner is turned on for the first time after it is plugged in, the display will show the current room temperature and will run in the 6th Sense™ System control. When the air conditioner is turned on at all other times, the display will show the previous settings for 5 seconds, and then show the current room temperature.

2.Select mode. See “Mode.”

3.Select fan speed. See “Fan Speed.”

4.Set temperature. See “Temperature.”

Mode

1.Press MODE repeatedly until you see the indicator light glow for the desired setting.

2.Choose Cool, Dry, Fan, Power Saver or Heat (Heat/Cool models only).

■Cool—Cools the room. Press FAN SPEED to select High, Med, Low or Auto. Press the plus or minus TEMP button to adjust the temperature.

■Dry—Dries the room. The air conditioner automatically selects the temperature. Fan runs on Low speed only.

NOTE: Dry mode should not be used to cool the room.

■Fan—Only the fan runs. Press FAN SPEED to select High, Med or Low. The display shows the current room temperature.

■Power Saver—Fan runs only when cooling is needed. You can select the fan speed by pressing FAN SPEED.

NOTE: Because the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often.

■Heat (Heat/Cool models only)—Heats the room. Press FAN SPEED to select High, Med, Low or Auto. Press the plus or minus TEMP buttons to adjust the temperature.

NOTE: After 5 seconds, the display will show the current room temperature.

Fan Speed

NOTE: The Fan Speed button will operate only when the Cool, Fan or Heat mode (on some models) is selected.

1.Press FAN SPEED until you see the indicator light glow for the desired setting.

2.Choose High, Med, Low or Auto.

■High—for maximum cooling

■Med—for normal cooling

■Low—for quieter cooling

10