UsingtheMagnaStoreRemoteControl*
NOTE: Remote control may differ in appearance.
* MagnaStore Remote Control
Magnetically Attaches To Side of
AC For Easy Storage.
SUPER SMART
SMART System Control
The air conditioner automatically selects Cool or Dry mode, depending on room temperature and sets the temperature to 79ºF (26ºC).
■The temperature set point can be adjusted down to 75ºF (24ºC) or up to 83ºF (28ºC). Press the up or down arrow button once to change the temperature 2ºF (1ºC) or twice to change it 4ºF (2ºC).
■If the current room temperature is lower than the temperature set point, Dry mode is selected. Fan runs on Auto speed only.
■If the current room temperature is higher than the temperature set point, Cool mode is selected. Fan speed may be selected by the user.
1.Press SMART System control.
NOTE: One CR2025 battery (included) powers the remote control. Replace battery after 6 months of use, or when the remote control starts to lose power.
You must unscrew small screw to allow you to remove battery compartment.
Please ensure the correct direction |
| |
for polarity of the cell same as the | A | |
indicator on the bracket. | ||
| ||
| A. Bracket |
■Disposal of bettery:Old batteries must be removed and
disposed of in accordance with current legislation as they are harmful to the environment.
Power
Press POWER to turn on the air conditioner.
SMART
2.In Cool mode, press FAN to select High, Med, Low or Auto.
SUPER Control
Used for fast cooling. The air conditioner automatically sets the fan speed to High and temperature to 64°F (18ºC).
NOTE: SMART System control button does not operate when SUPER control is selected.
1.Press SUPER control. The air conditioner automatically sets the fan speed to High and temperature to 64°F (18ºC).
SUPER
2.To turn SUPER control off, press the Mode, Fan, Power or the up arrow button.
Fan
Press FAN to choose High, Med, Low or Auto.
NOTE: Auto fan speed cannot be selected in Fan mode.
Mode
Press MODE to choose Cool, Dry, Fan, Power Saver or Heat (Heat/Cool models only).
12