Cabletron Systems CSX1000 manual Error reading sdconf.rec file, Error requesting slot activation

USER’S GUIDE

Error reading platform type: couldn’t open file C:\SYSTEM\PLATFORM.NEI

Error reading platform type: error reading C:\SYSTEM\PLATFORM.NEI

Error reading platform type: there is no “plat name” field

Error reading platform type: there was no “=” in the string

Error reading platform type: type value is too large

Error reading platform type: type was not converted to an int

There is a problem with the platform.nei file. Reinstall the system Installation/Upgrade diskettes or CD-ROM.

Error reading sdconf.rec file

An error occurred during parsing of the ACE configuration file. The file was found, but did not have the expected format. Either repeat the download of the file from the ACE server, or reenter the ACE database location configuration and save changes using CFGEDIT.

Error requesting slot activation

Contact your Distributor or Customer Support.

Error sending message to Call Control

The system detected a failure while sending a message to the WAN adapter. Restart the system and review the resource configuration. If the error persists, contact your Distributor or Customer Support.

Event <event code> occurred on FR Access <access index>, DLCI <dlci index>

A debug message logged to indicate Frame Relay events occurring for the indicated DLCI on the indicated Access. The event is given in both textual, event, and numeric, code, forms.

Facility not subscribed - Slot=<slot #> Port=<port #>

This probably indicates a SPID configuration error on the indicated line. The configuration should be corrected on the system or the switch.

Failed to allocate enough memory for XILINX load file

The WAN card initialization subsystem failed to allocate a buffer for use in downloading files. Restart the system. If the problem continues, contact your Distributor or Customer Support.

FAILED TO BOOT SYSTEM SOFTWARE

While attempting to load the System software, an error was detected. The system will automatically reset and attempt a reboot in an effort to correct the problem. If the system continues to fail, make note of the displayed messages, and contact your Distributor or Customer Support. A software update is likely needed.

FAILED TO FORMAT RFA

The Flash File System could not be formatted. The system will automatically reset and attempt a reboot in an effort to correct the problem. If the system continues to fail, make note of the displayed messages, and contact your Distributor or Customer Support. A software update is likely needed.

FAILED TO INSTALL XMODEM FILESET INTO FLASH MEMORY

While writing a file into the Flash File System, an error was detected. The system will automatically reset and attempt a reboot in an effort to correct the problem. If the system continues to fail, make note of the displayed messages, and contact your Distributor or Customer Support. A software update is likely needed.

448 CyberSWITCH