Cabletron Systems CSX1000, CSX1200 manual Default switch for numbered WAN interfaces

USER’S GUIDE

IP RIP SEND CONTROL

If IP RIP is enabled for a specific interface (LAN, WAN RLAN, and/or numbered WAN interfaces), an IP RIP send control must be selected. This element controls how IP RIP update messages are sent on an IP RIP interface. There is a different default value depending on the type of interface configured. The default value is automatically preconfigured when IP RIP is enabled.

The following tables provide the possible options for IP RIP send control.

For LAN and WAN RLAN interfaces:

Send Control Options	Description	RIP Version Sent
Do Not Send*	Indicates no IP RIP packets to be sent.	(none)
IP RIP v1**	Compliant with RFC 1058. Uses standard	RIP v1
	(broadcast) addressing.
IP RIP v1 Compatible	Uses RFC 1058 route subsumption rules with	RIP v2
	standard (broadcast) addressing
IP RIP v2	Compliant with RFC 1723. Uses standard	RIP v2
	(multicast) addressing

(*)The default switch for WAN RLAN interface. (**) The default switch for LAN interfaces.

For numbered WAN interfaces:

Send Control Options	Description	RIP Version Sent
Do Not Send*	Indicates no IP RIP packets to be sent.	(none)
IP RIP v1	Compliant with RFC 1058. Use with unicast	RIP v1
	addressing only (Specify Explicitly option).
IP RIP v1 Compatible	Uses RFC 1058 route subsumption rules. Use	RIP v2
	with unicast addressing only (Specify Explicitly
	option)
IP RIP v2	Compliant with RFC 1723. Uses standard	RIP v2
	(multicast) addressing

(*) The default switch for numbered WAN interfaces.

IP RIP RESPOND CONTROL

If IP RIP is enabled for a specific interface, then designation of this element is required.

This element controls how the system responds to IP RIP requests on the interface. The default value is automatically preconfigured when IP RIP is enabled.

110 CyberSWITCH