Cabletron Systems CSX1200, CSX1000 manual IPX Routing Option, ENABLING/DISABLING IPX Using Cfgedit

CONFIGURING IPX

IPX Routing Option

IPX ROUTING OPTION

ENABLING/DISABLING IPX

Note: The CyberSWITCH does not currently provide IPX data transfer over X.25 links.

USING CFGEDIT

1.Select Options from the main menu.

2.Select IPX Routing from the Options menu. The following menu will be displayed:

IPX Menu:

1) IPX Routing (Enable/Disable)

Select function from above or <RET> for previous menu: 1

The IPX Routing feature is currently DISABLED.

Do you wish to ENABLE the IPX feature (Y or N) [default = N]? Y

The IPX Routing feature is currently ENABLED.

Press any key to continue.

3.As illustrated on the sample screen above, follow the onscreen instructions to enable IPX routing. The following extended IPX menu will be displayed:

IPX Menu:

1)IPX Routing (Enable/Disable)

2)IPX Internal Network number

3)IPX Interfaces

4)Routing Protocols (Enable/Disable)

5)IPX Static Routes

6)NetWare Static Services

7)IPX Spoofing Information

8)IPX Type 20 Protocol

9)Isolated mode (Enable/Disable)

10)Triggered RIP/SAP

Select function from above or <RET> for previous menu:

You will use this menu to complete the IPX configuration.

IPX OPTION CONFIGURATION ELEMENT

STATUS

IPX can be either enabled or disabled, with disabled being the default. If the option is set to enable, the system will process and forward IPX data packets at the IPX network layer. If the option is set to disable, the system will process and forward IPX data packets at the MAC or bridging layer.

Workgroup Remote Access Switch 271