Cabletron Systems CSX1200 Semipermanent. Device x reconnected by admin, Slot #, port # Cfg Error

SYSTEM MESSAGES

System Message Summary

Semipermanent. Device "x" reconnected by admin.

The administrator has issued the call device <device name> command after issuing the disc device <device name> command. This restarts the semipermanent feature for the indicated device.

Severe congestion CLLM received for DLCI <dlci index>

A CLLM message was received indicating severe congestion may be expected on the PVC associated with the indicated DLCI.

Signal for unknown CallCmd task: <task Id>

Contact your Distributor or Customer Support.

<slot #, port # > Cfg Error

Line vs. adapter configuration error. A line is configured for port <port # > that does not exist on the adapter in slot <slot # >.

[SNMP] Authentication failure, improper access rights There are two possible causes for this message:

•The SNMP Agent received a SetRequest PDU that contained a Community Name with an MIB access level of MIB GUEST or MIB USER. The MIB access level must be MIB ADMIN to per- form a SetRequest. The request was discarded.

•The SNMP Agent received a PDU that contained a Community Name with an MIB access level of MIB GUEST and an object Id that cannot be accessed with an MIB GUEST access level. The request was discarded.

[SNMP] Authentication failure, unknown community name

The SNMP Agent received a request PDU whose community name is not configured in the Community Names Table. The request was discarded.

[SNMP] SNMP initialization failure - unable to allocate necessary memory

The SNMP feature was unable to initialize because it could not obtain the necessary memory. The SNMP feature is disabled and no SNMP request will be processed. Contact your Distributor or Customer Support.

[SNMP] SNMP initialization failure - unable to open UDP port

The SNMP feature was unable to initialize because it could not obtain the necessary UDP port. The SNMP feature is disabled and no SNMP request will be processed. Check the configuration, and then contact your Distributor or Customer Support.

[SNMP] SNMP initialized successfully

The SNMP Agent has been successfully initialized and is fully operational.

[SNMP] Unable to obtain an SNMP Trap queue entry buffer

The SNMP Agent attempted to generate a TRAP PDU but was unsuccessful because it could not obtain necessary memory. The TRAP was not sent. Contact your Distributor or Customer Support.

[SNMP] Unable to obtain an SNMP Trap queue header

The SNMP Agent attempted to generate a TRAP PDU but was unsuccessful because it could not obtain necessary memory. The TRAP was not sent. Contact your Distributor or Customer Support.

Workgroup Remote Access Switch 473