Cabletron Systems CSX1000, CSX1200 manual Service Indicator Remains LIT

USER’S GUIDE

SERVICE INDICATOR

The Service indicator comes on normally during system power-up, and then goes off. If the Service indicator remains lit or blinks after power-up, it is signaling that something needs attention in the system.

Refer to the section below that pertains to the Service indicator’s activity. Also, you may access your administrative console for further information (issue the dr console command to view system messages).

SERVICE INDICATOR REMAINS LIT

If the Service indicator remains lit during the power-on sequence, this means the system software is unable to boot. The system may be having some type of operational problem. While the Service indicator remains lit, the other LEDs will blink a certain number of times, pause, then blink that number of times again (See following table). This pattern will be repeated five times. The actions to take if this occurs are:

1.Make note of the number of consecutive blinks.

2.Restart the system.

3.If the Service LED is still lit, and the other LEDs are still flashing, contact your distributor and provide them with the count of consecutive blinks.

422 CyberSWITCH