Cabletron Systems CSX1000, CSX1200 manual Changes password for current access level

USER’S GUIDE

Command		Use
neif		displays the interface table
pkt capture <connection mode>		specifies which packets will be captured by the packet
		capture feature (all, reqd, pend, actv, idle, or none)
pkt mac		enables the MAC address monitor display
pkt [on/off]		enables or disables the Packet Capture feature
pkt display		displays captured packets
pkt load <filename>		loads previously saved Packet Capture file into memory
pkt save <filename>		saves captured packets to a disk file
pswd	(GUEST)	changes password for current access level
radius chap		attempts a RADIUS authentication session using CHAP
radius iphost		attempts a RADIUS authentication session using IP Host
		resolution
radius ipres		attempts a RADIUS authentication session using IP
		resolution
radius macres		attempts a RADIUS authentication session using MAC
		resolution
radius pap		attempts a RADIUS authentication session using PAP
recover		notifies the boot device that you are attempting a
		download of SSB software
restore		copies backup config files into current files
restart		restarts the system program remotely using Telnet
sentry ace		attempts an authentication session using ACE
sentry radius		attempts an authentication session using RADIUS
sentry status		displays current status of user level authentication servers
sentry log		logs rejection messages from the authentication server
session		displays the current active administration sessions
session kill <session id>		terminates the active session specified by the session id
snmp stats		displays current SNMP related statistics
sp		lists each semi-permanent device and associated status
status	(GUEST)	displays system errors and system messages
tcp conns		displays the current TCP connection status
tcp stats		displays the current system TCP statistics

622 CyberSWITCH