Cabletron Systems CSX1200, CSX1000 manual IP RIP Output Processing on a WAN Interface

Models: CSX1000 CSX1200

1 644
Download 644 pages 26.85 Kb
Page 399
Image 399

PROBLEM DIAGNOSIS

IP RIP

3.Also look for the IfStatRcvBadPackets and IfStatRcvBadRoutes counters.

If these counters are not 0, there may be something wrong with the Router.

If these counters are 0, there is an unexpected condition present within the CyberSWITCH software. Contact Customer Support.

IP RIP OUTPUT PROCESSING ON A WAN INTERFACE

Problem:

The Router does not display the correct route entry, i.e., the Router does not seem to be learning route information from the CyberSWITCH system via RIP.

Action:

1.Verify that the IP RIP Send Control is set to the proper RIP version that the Router can understand. Refer to page 398 for instructions regarding check RIP versions.

2.Enter the ip rip interface administrative console command. Look for the Broadcast Address value. This is the IP address of the router that the RIP messages are sent to.

If the address is not the correct address for the Router, correct the transmit broadcast address for the interface using CFGEDIT. Refer to page 398 for instructions regarding checking the address.

3.Enter the ip rip stats administrative console command. Look for the IfStatSentResponses counter for the interface, which shows the number of RIP update messages sent on the interface.

If the counter is 0, enter the ip rip send administrative console command to force the RIP update message to be sent immediately.

4.Repeat step 3).

If the counter is still 0, there is an unexpected condition present within the CyberSWITCH software. Contact Customer Support.

5.Check the Router and ensure that it is set up to learn route information via RIP.

IP RIP INPUT PROCESSING ON A WAN INTERFACE

Problem:

The CyberSWITCH system does not display the correct route entry, i.e., the system does not seem to be learning route information via RIP.

Action:

1.Verify that the IP RIP Receive Control is set to the proper RIP version that the Router is using. Refer to page 398 for instructions regarding check RIP versions.

Workgroup Remote Access Switch 399

Page 399
Image 399
Cabletron Systems CSX1200, CSX1000 IP RIP Output Processing on a WAN Interface, IP RIP Input Processing on a WAN Interface