CONFIGURING OFF-NODE SERVER INFORMATION

RADIUS Authentication Server

USING CFGEDIT

1.Select option (2), RADIUS from the Off-node Server Information menu. If you need guidance to find this menu, refer to the instructions provided in the VRA Manager Authentication Server configuration section. The following screen will be displayed:

RADIUS Authentication Server Menu:

 

 

Primary Server

 

 

IP Address

is 128.111.011.001

 

Shared Secret

is "SHAREDSECRET1234"

 

UDP Port Number

is 5800

 

Secondary Server

 

 

 

is Not Configured

 

Access Request Retry

 

 

Number of Access Retries

is 5

 

Time between Retries

is 2 seconds

RADIUS Server Options:

 

1)

Primary (Master) Server

 

2)

Secondary (Slave) Server

 

3)

Miscellaneous Information

 

Select function from above or <RET> for previous menu:

2.Select (1) Primary Server to enter the following information:

a.IP address of the Authentication Server

b.shared secret between the CyberSWITCH and Authentication Server

c.UDP port number used by the Authentication Server

3.Optional: configure a secondary RADIUS Server with selection (2). In the event that the primary server does not respond to system requests, the secondary server will be queried for device authentication information. The address and port number of the Secondary RADIUS Server must not be the same as the Primary RADIUS Server.

4.Select Miscellaneous Information to finish the configuration. Specify the number of access request retries that the system will send to the Authentication Server, as well as the time between retries.

USING MANAGE MODE COMMANDS

radius

Displays the current RADIUS server configuration data.

radius change

Allows you to change the current RADIUS server configuration data. After entering the radius change command, you will be prompted for the configuration elements you want to change.

Workgroup Remote Access Switch 181

Page 181
Image 181
Cabletron Systems CSX1200, CSX1000 manual Displays the current Radius server configuration data