Cabletron Systems CSX1000, CSX1200 manual Line Configuration Elements, Auto TEI

USER’S GUIDE

datalink add

Allows you to add a data link. The following sample screen shows how a data link is added.

Current LINE Configuration:
id	LINE NAME	TYPE	SLOT	PORT

--------------------------------------------------------------------------------

1	LINE.BASICRATE1	BR_ISDN	1	1
2	LINE.BASICRATE2	BR_ISDN	1	2
3	DMS100.LINE1	BR_ISDN	2	1
Select	line id for new data link or press <RET> to cancel: 3<RET>

Automatic TEI negotiation (Y or N) [default = Y]? N<RET>

TEI value [default = 1]? <RET>

Service Profile ID (enter 0 for no SPID) [default = NO SPID]? 13135551212<RET>

Directory number [default = 13135551212]? 5551212<RET>

Number of digits to verify [default = 7]? <RET>

The DATALINK configuration has been updated successfully.

datalink change

Changes an existing data link.

datalink delete

Deletes an existing data link.

ampconf

Allows you to change the AMP port configuration.

LINE CONFIGURATION ELEMENTS

LINE NAME

A1 to 16 user-defined character string (using all non-blank characters) that identifies the line. Each line must have a unique name.

LINE SLOT

The slot number assigned to the resource that will terminate this line.

LINE PORT

The port number of the resource that will terminate this line.

LINE INTERFACE TYPE

For basic rate lines only. Choice of point-to-point or point-multipoint. The point-to-point interface type is the type most often used in the U.S.; point-multipoint is most often used in Japan.

AUTO TEI

For basic rate lines only.The default setting for automatic TEI negotiation is “yes”. For #5ESS and DMS100 lines, you should not change the setting. For NTT point-to-point lines, you should disable the automatic TEI negotiation by answering “no” to the prompt for this feature.

94 CyberSWITCH