Cabletron Systems CSX1200, CSX1000 manual UDP Commands, User Level Security Commands

SYSTEM COMMANDS

UDP Commands

trace x25 [on/off]

Enables or disables the X.25 packet tracing option. This feature displays up to 15 octets of the packet. To display the log file, issue the dr console command. This option is initially disabled.

wan fr-ietf trace [on/off] [in/out] [device/fr_accessname_dlci] [prot] Enables or disables the tracing of incoming and out going frame relay IETF packets. This feature displays the direction of the packet, the device or PVC name, the line protocol, and up to 15 octets of the packet. To display the log file, issue the dr console command. This option is initially disabled.

UDP COMMANDS

UDP (User Datagram Protocol) provides a datagram mode of communication for delivery of packets to a remote or on-node device. When the system’s IP operating mode is enabled, the following UDP commands are available:

udp conns

Displays the current UDP connection status.

udp stats

Displays the current system UDP statistics. Refer to UDP Statistics, for a list of available statistics and their definitions.

USER LEVEL SECURITY COMMANDS

The following console commands are available to provide information on the authentication servers for user level security. They may be used to diagnose the following problems with:

•connections to an off-node authentication server

•CyberSWITCH configuration

•authentication server user database entries

sentry log

This command acts as a toggle switch, enabling or disabling user authentication rejection messages. If enabled, authentication rejection messages (identifying users who generated the messages) are written to the log file. To display the log file, issue the dr console command. This option is initially disabled.

sentry status

Displays current Sentry status. This includes whether or not trace is enabled, as well as the status and port number of each authentication server on the system.

sentry tacacs

Attempts an authentication session using TACACS. The system will report whether the authentication attempted was successful or rejected.

sentry radius

Attempts an authentication session using RADIUS. The system will report whether the authentication attempted was successful or rejected.

Workgroup Remote Access Switch 557