IBM RS/6000 7043 43P manual Configure Surveillance Policy, Diskette

If the system was powered-on when the AC loss occurred, the system r when power is restored. If the system was powered-off when the AC l occurred, the system remains off when power is restored.

Configure Surveillance Policy

Note: Runs on CHRP systems units only.

This service aid monitors the system for hang conditions, that is, hardwar software failures that cause operating system inactivity. When enabled, an surveillance detects operating system inactivity, a call is placed to repo

Use this service aid to display and change the following settings for t Policy.

Note: Because of system capability, some of the following settings may not displayed by this service aid.

ŸSurveillance (on/off)

ŸSurveillance Time Interval

This is the maximum time between heartbeats from the operating system.

ŸSurveillance Time Delay

This	is	the time to delay between when the operating system is in c
when	to	begin operating system surveillance.

ŸChanges are to take affect immediately

Set this to Yes if the changes made to the settings in this menu ar immediately. Otherwise the changes takes place beginning with the next boot.

This service aid may be accessed directly from the AIX command line, b

/usr/lpp/diagnostics/bin/uspchrp -s

Create	Customized	Configuration	Diskette
This	selection	invokes	the Diagnostic Package Utility Service Aid which allo
user	to perform the		following action:

ŸCreate a Standalone Diagnostic Package Configuration Diskette

The	Standalone Diagnostic		Package Configuration Diskette allows the following
to	be changed from	the	console:
–	Default refresh	rate	for a LFT

9-147043 43P Series User's Guide