The memory module connectors for the Model 150 are shown in the figure.
Memory-Module
Connectors
4 3 2 1
The memory module connectors for the Model 240 are shown in the figure.
2.Remove any adapters that are blocking the memory module connecto “Removing Adapters” on page
3.Determine which memory modules you want to remove.
Memory modules must be removed in pairs. If you are replacing t modules you remove, they must be replaced with the same type.
Note: If | your | system unit is | a Model | 140, slot A must contain a |
in | order | for the system | unit to | function. If your system |
