IBM RS/6000 7043 43P manual PCI FC-AL Adapter, Download Microcode to Other Devices, Aids

Flag	Description
-A	All disk	drives.
-D	Microcode is		on diskette /etc/microcode(default to directory).
-l	RAID disk drive–physical disk channel/ID (example 27).
-P	Download	the	previous level of microcode (default to latest

Download Microcode		to	a	PCI FC-AL Adapter
The	following usage statements describe the syntax of the command
FC-AL	Adapter.
Usage:
diag -c -d <device_name> -T "download [-s {diskettedisk}]
[-f <file_name>]"
Flag	Description
-d	System		name for the adapter			or device	(example fcs0).
-f	File	name		on the source device. (Disk source must have comp
	from	root		directory.)
-s	microcode			source/etc/microcode.	is	default.	Default source devic
	disk.

Download Microcode to Other Devices

The following usage statements describe the syntax of the command:

Usage:

diag -c -d <device_name> -T "download [-s diskette] [-l previous] [-F]"

Flag	Description
-F	Force flag. Required to download microcode if the current
	unavailable	on the source.
-l	Microcode level. Latest is default.
-s	microcode	source/etc/microcode.	is default. Default source devic
	disk.
Fibre	Channel RAID Service	Aids

The Fibre Channel RAID service aids contain the following functions:

Certify LUN

This selection reads and checks each block of data in the excessive errors are encountered the user is notified.

You can run this task from the AIX command line. The followi statement describes the syntax of the fastpath command:

Chapter 9. Introduction to Tasks and 9Service-23Aids