IBM RS/6000 7043 43P manual 647043 43P Series Users Guide

2. Remove any adapters	that are	blocking access to the air duct and p
card connectors (see	“Removing	Adapters” on page 4-80).

3. Remove the screw that holds the air duct to the system board.

4. Spread the arms on the air duct and remove it from the system unit.

5.Touch the static-protective package containing the processor card to an unpainted metal surface on the system unit; then remove the card from package.

6.Inspect the empty processor card connector and remove any dust that collected.

Note: Do not push on the heatsink while installing or removing a processor card. This could damage the processor.

4-647043 43P Series User's Guide