Use this service aid to display and change the following settings Power On Policy.
Note: Because of system capability, some of the following settings displayed by this service aid.
Ÿ Power On Via Ring Indicate (on/off)
ŸNumber of Rings Before Power On
This service aid may be accessed directly from the AIX command
/usr/lpp/diagnostics/bin/uspchrp
Configure Ring Indicate Power On
Note: Runs on RSPC systems units only.
This | service | aid allows | the user | to | display and | change the NVRAM |
Ring | Indicate | Power On | capability | of | the service | processor. |
The settings allows the user to:
Ÿ Enable/Disable power on from Ring Indicate
ŸRead/Set the number of rings before power on
Configure Service Processor
Note: Runs on RSPC systems units only.
This service aid allows you to display and change the NVRAM setting service processor.
This service aid supports the following functions:
ŸSurveillance Setup
ŸModem Configuration
Ÿ | Call | In/Call Out | Setup |
Ÿ | Site | Specific | Call In/Call Out Setup |
ŸReboot/Restart Policy Setup
Surveillance Setup
This selection allows you to display and change the NVRAM settings f surveillance capability of the service processor.
The settings allow you to:
Chapter 9. Introduction to Tasks and
