7043 43P Series User's Guide
1. At the system prompt, stop the operating system using the prop command for your operating system.
2. After the operating system is stopped, power off the system
3. Go to “Step 6.”
Do the following to shut down your system:
Go to “Step 5.”
Do you want to run the Online diagnostics in Service mode?
NO
YES
Step 4
Diagnostic tests can be run on many resources while the operating system running. However, more extensive problem isolation is obtained by running Onli diagnostics in Service mode.
Go to “Step 4.”
YES
Verify with the system administration and users that the system turned off. If so, then turn off the system unit and go to “Ste
NO
The system must be turned off in order to run diagnostics.
Step 3
Determine if the operating system is accepting commands.
Is the operating system accepting commands?
