IBM RS/6000 7043 43P manual J15

3. If you have a Model 150:

a. Locate jumper J15 using the following illustration.

J15

b. To move the jumper,	first	touch the metal	frame of	the	sys
gently pull upward on	the	small box (jumper)	covering	the	pins.

ŸTo enable the automatic power-up feature, place the jumper

rear two pins.

ŸTo disable the automatic power-up feature, place the jumpe front two pins. This is the factory default setting.

Chapter 4. Installing and Removing4-21Options