332-MHz Processor Upgrade (for the Model 140)
This section explains the procedures for installing a 332-MHz processor upgrade kit
into a Model 140 system.
Note: If you wish to install a 200-MHz or 233-MHz processor upgrade kit into your
system, refer to “200-MHZ and 233-MHz Processor Upgrade (for the Model
140)” on page 4-38.
Before you begin:
Read “Safety Considerations” on page 4-2 and “Handling Static Sensitive
Devices” on page 4-3.
Remove the system unit cover (see “Removing the Cover” on page 4-4 ).
Locate the following additional items:
– A flat-head screwdriver.
– A paper towel for the thermal grease.
– Make sure you know the level of firmware installed in your system unit.
To determine which level is currently installed, see Chapter 3, “System
Management Services” on page 3-1.
4-50 7043 43P Series User's Guide