Step 16
This step loads the Standalone Diagnostics. If you are unable to diagnostics, go to “Step 7.”
1. Set the power to on.
2. Insert the diagnostic
3.When the keyboard indicator starts blinking, press the F5 key o attached keyboard or number 5 on the ASCII keyboard to indicat diagnostics are to be loaded.
4.Enter any requested passwords.
5. Follow any instructions to select a console.
Did the | Diagnostics | Operating | Instructions display without any obvious display | |
problem? |
|
|
|
|
NO | Go | to | “Step | 7.” |
YES | Go | to | “Step | 9.” |
Step 17
The | diagnostics did not find a hardware problem. If you still hav |
your | software support center. |
Chapter 8. Hardware Problem
