4. Disconnect the signal and power cables from any drives installed 5.

Note: Removing cables from a drive in bay 4 is shown to illustra procedure.

5. Remove the disk drive bracket assembly from the system unit.

Note: Any adapters installed in slot 5 may have to be temporarily order to remove the disk drive bracket. Refer to “Removin page 4-80for adapter removal instructions.

What to do next?

Ÿ To install or remove a drive in bay 2 or 3, continue with

Ÿ To install or remove a drive in bay 4 or 5, go to step 23

Chapter 4. Installing and Removing4-89Options

Page 191
Image 191
IBM RS/6000 7043 43P manual What to do next?