Press Enter when you are finished; you must type the password again for verification.

If you

make

a

mistake, Escpresskey theand

 

start

again.

 

 

 

 

 

 

 

Note:

If

an

error

 

occurs

when

you

 

attempt

to set the privileged-access

 

then make sure the password-enabling

jumper has been changed. (See t

 

User's

Guide

 

for instructions

on

changing

the password-enabling jumper.)

 

After

you

have

entered

and

verified

the

password, the privileged-access

icon flashes and changes to the locked position to

indicate that

your

sy

requires the password you just entered

before

running

system

programs.

 

Attention:

Once

the password-enabling jumper has

been

 

changed

and

the

 

 

 

 

 

 

 

 

privileged-access password has been set,

great

 

care

must

be taken

to

 

 

 

 

 

 

preserve the privileged-access password.

 

 

 

 

If

you set the privileged-access

 

 

password

and

later

misplace

it,

 

your

system

must

be

returned

for

s

 

In order

to prevent loss of system

use,

 

please

record

the

 

 

 

 

 

 

 

 

privileged-access password immediately whenever it is

changed.

 

 

 

 

 

 

 

Attention:

If

no

user-defined

boot-list

exists,

and

 

 

the

privileged-access

 

 

 

 

 

 

 

 

password

has

been

enabled,

you

will

be

asked

 

for

the

privileged-access

 

 

 

 

 

 

password

at startup every time you boot

up

your

system.

 

 

 

 

 

 

 

Moving

the

password-enabling

jumper

back

to

the

defaultnot

dipositionable

does

 

or erase the privileged-access password. Removing

the jumper or moving the

jumper

back to

the

default

position

 

only

prohibits

 

changing

or

disabling

th

with

the

System

Management

Services.

 

 

 

 

 

 

 

 

 

 

 

 

 

3-167043 43P Series User's Guide

Page 74
Image 74
IBM RS/6000 7043 43P manual Must, To prevent loss of system, Changed, Has, System