
7. Follow the displayed instructions to checkout the desired resources.
8.When testing is complete; use the F3 key to return to the DIAGNOSTIC OPERATING INSTRUCTIONS.
Location Codes (Model 140 and Model 240)
The location code format for devices installed in the system unit is as
G,H SCSI
For planars, cards, and
Device/FRU/Port ID
Connector ID
Slot or Adapter Number Bus Type
AB identifies a bus type, CD identifies a slot or adapter number, EF a identifier, and GH is a port identifier, address, memory module, device, Adapters/cards are identified with just
The possible values for AB are as follows:
ððfor processor bus
ð1 for ISA buses
ð4 for PCI buses
ð5 for PCMCIA buses (not supported)